1500W-manufacture,factory,supplier from China

Features1.Simple and Easy to operate, flexible and convenient, Small in size, simple in training and easy to operation 2.Fast welding speed with High Quality, more Efficient, the laser welding work piece is free of deformation and welding scar, the welding is firm 3.Laser output is stable, Ensuring weld consistency, 4.Energy conservation and Environmental protection, Less consumables, lower running cost and maintenance cost. 5.Beautiful weld seams, improving the sheet metal processing to new level.Product Name Handheld fiber laser welding machineLaser power1000W /1500W /2000W /3000WFi

Features of the main control boardThe integrated power module of the fiber laser is extended to the manipulate center of 180 drives.With external control interface and communication interface, can be local control, remote software control, remote simulation control.With a large capacity memory chip and RTC real-time clock, can store parameter Settings, waveform editing, running records, fault records, etc., and can be called.Equipped with upper computer software, with debugging mode, running mode.In debugging mode, you can set the driving current value, temperature and humidity limit

Features of the main control boardFocused layout：200w-800w special energy supply for high strength co2 laser tube.With external control interface and communication interface, can be local control, remote software control, remote simulation control.With a large capacity memory chip and RTC real-time clock, can store parameter Settings, waveform editing, running records, fault records, etc., and can be called.Equipped with upper computer software, with debugging mode, running mode.In debugging mode, you can set the driving current value, temperature and humidity limit, overcurrent limi

Product features of the driver module:4-6 channels *20a unbiased regular-modern drive output, every output current software program can be adjustable and enabled to manipulate respectively.The output of 30*6=180 constant-current control channels can be extended by a dedicated main control board, and the synchronization error of each channel does not exceed 1uS when switching.Output voltage 20-180V adaptive (maximum constant-current current decreases with increasing output voltage).Module power up to 9KW.The rising and falling edge of the constant-current output current is less than 10US; No ov

Product featuresHuge variety energy deliver layout, can meet the wishes of 220v± 15% adaptive power deliver.Check whether or not the cope with is attached to save you high voltage output without handle, which may cause dangerMulti-function integration, integrated design: high-power charging power supply + high-power output control unit + overall system detection and control + serial port screen + software serial port upgrade function.Original high current plug and draw device, safer and more convenient to use.Multiple protection function, the machine is more reliable.Multiple fault alarm promp

videoProduct ParametersOperating environmentNameYFPN-100-GMC-BPoweredOptional battery, 100W continuous work for 1hStandard single-phase 220V:10%50/60Hz AOMachine power consumption<500WWorking temperature5°C~40°CWorking environment humidity<80%Optical parametersAverage laser power≥100Wpower instabilitypulseWay of laser working<2%Pulse Width10-500ns adjustedMax.

videoProduct ParametersOperating environmentNameYFPN-200-GMC-BPoweredOptional battery, 100W continuous work for 1hStandard single-phase 220V:10%50/60Hz AOMachine power consumption<500WWorking temperature5°C~40°CWorking environment humidity<80%Optical parametersAverage laser power≥200Wpower instabilitypulseWay of laser working<2%Pulse Width10-500ns adjustedMax.

Equipment features1. Water cooling cooling: It can be used in high or low temperature environments by heating or cooling the equipment with a chiller to maintain the optimal operating temperature and ensure long-term stable operation.2. Designed for more complex, large-scale, and precise surface cleaning, with a wide range of applications, it can remove surface impurities such as metal oxides, rust, oil stains, dirt, resin, paint, post weld black ash, welds, graffiti, and coatings. It can adjust different parameters, has no thermal effect, and will not cause any damage to the substrate.3.

ES/ESA Series CO2  Laser Power Supply Product SpecificationFeature of Laser Hair Removal1. well-tailored：includes active % circuit，gain better strength issue，meet the global generic enter voltage variety(ac90-264v,50/60hz).be legitimate to face as much as the affection to output electricity at the same time as the grid voltage modifications notably.2. extra power：ensure that the most current is steady at the complete input voltage variety.3.

Product FeaturesCHARACTERISTICS△ Flat structure design, lightweight, adopting a flat structure with an all aluminum casing design, which is more efficient than conventional electrical systemsThe source is 30% lighter in weight.△ Cutting and carving compatibility:Stable power, strong adaptability, fast response speed, suitable for cutting or carving; Simple control, canHigh reliability: high/low level control of laser start and stop;△ Simple laser power control:Laser power can be controlled using both analog signals 0-5V and 5V PWM signals.The power supply itself has an open circuit protection

Photonic Cosmetology Power Supply Product FeatureInvention patent design: ensure that 3 consecutive pulses have the equal pulse energy.The internal structure is modularized, and the metal shell with anti-interference treatment has been proved by experiments: it can effectively avoid unstable work caused by electromagnetic interference.Multi-channel auxiliary power output: including all required 24V 12V power supplies for OPT/IPL equipmentMultiple output pulse forms: single pulse, pulse, pulse group, pulse width adjustableMultifunctional integrated design: high-power IPL power supply + machine

Product featuresThe built-in lively %, huge input voltage range;Present day resonance soft transfer technology, high efficiency and power density; there are high voltage precision, stable performance and reliable safety;output voltage ripple, plus or minus 0.5% VO; Output voltage comprehensive adjustment rate: ±0.5%;output load ability, 0 to 5 KHZ pulse current output voltage change is not more than plus or minus 0.5% VO;output with short circuit protection, over current protection, over temperature protection.failure status display, failure information report;output voltage can be autom

Product features of the driver module:4-6 channels *20a independent consistent-current force output, every output cutting-edge software may be adjustable and enabled to manipulate respectively. The output of 30*6=180 constant-current control channels can be extended by a dedicated main control board, and the synchronization error of each channel does not exceed 1uS when switching. Output voltage 20-180V adaptive (maximum constant-current current decreases with increasing output voltage). Module power up to 9KW. The rising and falling edge of the constant-current output curr

Features of air-cooled magnetic thin power supply system:1.2air-cooled magnetic skinny power supply000 watts of high frequency output can get a better enjoy.2.Each unit is equipped with a single radio frequency card, which can work independently; the card can be swiped to record the number of times and the time; 4 units can control work at the same time.

Product Feature：Flat structure layout、 much less weight， use flat shape with all aluminum casing layout， 30% lighter than conventional energy materials.Cutting and Engraving Compatible ：Stable Power， Well-adapted，  fast response，  suitable for cutting or engraving；Simple control，  High reliablity：High and low level control the laser start or stop；Control the laser power is simple：can use 0~5V analog signal and 5VPWM signal to control powerPower itself has open circuit protection：the use will be more secure，and can Prolong the life of power significantly；Power  has  man

Product Feature：Targeted layout：200w-800w unique power supply for high energy co2 laser tube.With voltage regulator feature：includes energetic p.c circuit，meet the global popular enter voltage range(ac90-264v,50/60hz).More power:Ensure that the maximum current is 45mA at the entire input voltage range.Output positive and negative to the ground high pressure suspension：Can be used for positive or negative high voltage output, Easy to adapt to multi-tube folding applications.Laser equipment with high safety：Power itself has open circuit protection, the use will be more secure，and can Prolong the

Product Feature：Focused layout：200w-800w unique strength deliver for excessive energy co2 laser tube.With voltage regulator characteristic：consists of energetic % circuit，meet the worldwide established enter voltage variety(ac90-264v,50/60hz).More power:Ensure that the maximum current is 45mA at the entire input voltage range.Output positive and negative to the ground high pressure suspension：Can be used for positive or negative high voltage output, Easy to adapt to multi-tube folding applications.Laser equipment with high safety：Power itself has open circuit protection, the use will be more s

Product Feature：Centered design：200w-800w special strength deliver for high electricity co2 laser tube.With voltage regulator function：consists of active percent circuit，meet the global usual enter voltage variety(ac90-264v,50/60hz).More power:Ensure that the maximum current is 45mA at the entire input voltage range.Output positive and negative to the ground high pressure suspension：Can be used for positive or negative high voltage output, Easy to adapt to multi-tube folding applications.Laser equipment with high safety：Power itself has open circuit protection, the use will be more secure，and

Product Feature：Flat shape layout、 less weight， use flat shape with all aluminum casing layout， 30% lighter than conventional energy elements.Cutting and Engraving Compatible ：Stable Power， Well-adapted，  fast response，  suitable for cutting or engraving；Simple control，  High reliablity：High and low level control the laser start or stop；Control the laser power is simple：can use 0~5V analog signal and 5VPWM signal to control powerPower itself has open circuit protection：the use will be more secure，and can Prolong the life of power significantly；Power  has  manual test&n

T/TA Series CO2 Laser Power Supply Product SpecificationProduct Feature1. Robust universality：t collection laser strength deliver is the largest quantity and the maximum broadly used subject of laser electricity deliver at present ,they're the exceptional-selling domestic and overseas for decades.2. Good compatibility：Perfect Match 30W-150W CO2 laser.3. TA Series：1）Can be equipped with LCD screen：the number can shows the magnitude of current, the light indicator, the optical signalwater protection signal indicates signal normal and fault.

ES/ESA Series CO2  Laser Power Supply Product SpecificationProduct Feature1.Nicely-adapted：consists of energetic percent circuit，obtain higher electricity factor，meet the worldwide well-known input voltage variety(ac90-264v,50/60hz).be legitimate to resist the love to output energy when the grid voltage modifications significantly.2. More Power：Ensure that the maximum current is constant at the entire input voltage range.3. Patented technology Shell:Use patented technology shell，complies with industrial product standard, beautiful, durable, excellent heat dissipation perfor

Product parametersEquipment modelFLY-FB60Laser wavelength1064nmOutput power60WPulse width1064nm   20KHz-200KHzMarking speed120m/minRepetitive accuracy0.1mmLaser field mirrorF=160（100mm*100mm）Laser modelStandard with original laser, optional with other brands of lasersEngraving depth≤0.5   mmElectricity demandAc220V±10% 50Hz 5AmpCooling methodAir-cooledOverall power≤400WOverall weight60KgControl systemnuoyaSystem protection levelIP6Overall size470*610*1300mmProduct AdvantagesThe CO2 marking machine has high output power and energy, with an efficiency of up to 15% -25%.

Product parametersEquipment modelFLY-FB35Laser wavelength1064nmOutput power35WPulse width1064nm   20KHz-200KHzMarking speed120m/minRepetitive accuracy0.1mmLaser field mirrorF=160（100mm*100mm）Laser modelStandard with original laser, optional with other brands of lasersEngraving depth≤0.5   mmElectricity demandAc220V±10% 50Hz 5AmpCooling methodAir-cooledOverall power≤400WOverall weight60KgControl systemnuoyaSystem protection levelIP6Overall size470*610*1300mmProduct AdvantagesThe CO2 marking machine has high output power and energy, with an efficiency of up to 15% -25%.

Equipment characteristics1.The maximum power is increased to 60W, the marking accuracy is higher, the speed is faster.2.The marking gun head adopts full protection design to meet the EU CE safety standard.3.Self-developed Linux system, easy to operate, 7 inch HDcapacitive screen, sensitive editing.4.Software support secondary development, can be linked with MES、ERP、 PLC.5.External mouse, keyboard, scanning gun, computer, can be controlled by mobile app.6.Lithium battery adopts replaceable design, supporting charging while using.7.High degree of integration: automatic marking can be achieved w